The 0.584.326 Sit Proflame 2 IFC board is a device that allows the automatic ignition and pilot flame supervision to command the functions of a hearth appliance.
It is configured to control the ON/OFF main burner operation, giving the choice of both IPI (intermittent pilot ignition), and CPI (continuous pilot ignition) modes.
The Sit Controls 0584326 Proflame 2 IFC board directly controls the pilot assembly and an automatic SIT Gas Controls 880, 886, and 885 service valves of the Proflame families using low voltage electric power.
The IFC board is powered by Line voltage (AC) with the provision of battery backup in case of main power loss. Fans and lighting features will not function when the IFC is powered by battery backup.
The Proflame IFC has the ability to control the comfort fan through 6 speeds, modulate an accent light through 6 levels, and switch on or off an auxiliary output via the remote transmitter.
This Sit Controls 0.584.326 control module has the following specifications:
Pilot on Demand Feature -“NO” The pilot does not shut off after 7 days of appliance inactivity.
AC supply voltage and frequency 120V~60Hz max. 2.5A
Battery supply voltage 6V
Ambient Operating Temperature 14÷176°F (-10÷80°C)
Radio frequency remote control 315 MHz
Light dimming output 120V~60Hz max. 0.5A (res.)
Comfort fan output 120V~60Hz max. 2A (0.5pf)
Burner fan output 120V~60Hz max. 5A (0.5pf)
Spark voltage>10kV over 5mm spark gap
Spark energy>0,7mJ
Spark frequency 1Hz
Pilot ignition source Intermittent/Continuous
Flame Failure Response time 5 s
Waiting time 2 s
ATMO / FAN Pre-purge time 2 s / 15 s
ATMO / FAN Post-purge time 2 s / 120 s
Inter-ignition time 30 s
Safety time 60 s
Number of trial for ignition 2
Comfort fan startup delay 5 min
Comfort fan shut off delay 12 min
Recycle Time 30 s
This control module measures approximately 6 1/4 x 3 1/2 x 1 5/8 inches
Cross Reference:
Enviro 50-3312
SIT Control 0584326
